This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.
The unique staggered leg design of a C Stand allows it to be nested and placed...
This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.
The Lowel 40 in. C-Stand Sliding Leg Kit with 2.5 in. Grip Head & 40 in. Grip Arm (Chrome) is a motion picture and photography industry standard for go-to accessories in the studio or on location. The 40-inch double-riser shaft is outfitted with unique ergonomic locking tri-knobs that offer a...
The Matthews Reverse Stand is best suited for location work, since it can fold back on itself into a very compact package only 22.75" (58 cm) long. It has four risers, and its maximum height is 83.5" (2.1 m).
It can accommodate 11 lbs (5 kg) at maximum height.
Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw or 2" End Jaw. The Center Jaw has a fixed...
The Matthews Hollywood Baby Jr. Triple Riser Stand is very popular lighting stands for Baby fixtures which require a 5/8' mounting pin are made with steel legs and riser assembly. The tripod braced base with 'all-axis' non-marking locking casters provides great stability. Unlike others, Matthews...
The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head & Arm. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial...
Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added.
The Chimera Standard Light Boom is used to quickly and easily position overhead lights with softboxes. It operates like a small jib arm thus providing 72 inches of reach with 360 degrees rotating head extension for angular adjustment. Special single handle is attached on the head extension to...
The Avenger Roller Stand 12 with Folding Base (Chrome-plated/Black, 3.9 ft.) is a heavy duty, chrome-plated steel support that features a low base for extra stability, braking wheels, two risers and both a female 1/1/8" Junior receiver and a 5/8" Baby retractable stud. The legs fold up for transport...
The Saddle Sandbags 10 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.
Features:
Outer shell is water resistant, inner shell is polypropylene.
The Saddle Sandbag 15 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.
Features:
Outer shell is water resistant, inner shell is polypropylene.
Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2” or 3” Center Jaw or 2” End Jaw. The Center Jaw has a fixed...
A cheeseboro clamp with a 1-1/8" pin attached to it serves multiple purposes. Use it with a piece of pipe with a diameter of 1-3/4" to 3-1/4" as a temporary overhead grid.
The Saddle Sandbag 25 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.
Features:
Outer shell is water resistant, inner shell is polypropylene.
This portable background support features metal collars with an aluminum crossbar and uprights with a black finish to cut down on reflections. The air cushioned uprights have three sections with the diameter of 33mm for the largest section. The uprights extend from 44 inches to 120 inches (10...
The Savage Drop Stand Light Stand (9 ft.) is hands-down the easiest and quickest light stand set-up on the market today! The stand's essential benefit is in its auto-extending and collapsing legs that allow for quick and easy repositioning of lighting when moving between groups and in tight spaces....
The STUFFT Cinema Works 35 lb Shot Bag (Black with Red Handle) is used for securing the bases of light stands and set walls. The shot bags are useful to balance the light stands. The sand bag has a hand strap for easy handling and hanging on hooks. It is made of high quality material for longer...
The Manfrotto 244 Variable Friction Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The knob allows partial loosening for safe and precise positioning of a light head or camera. It has 5/8" studs on ball joints at both ends with...
Designed primarily for their use in lighting kits these stands are compact and light weight. They are ideal for assembling custom lighting kits or as a replacement. Many MSE Kit Stands employ a brake shoe system for locking off the riser tubes as opposed to pinch castings therefore permitting...
The Matthews Mini Slider Stand (38 In.) features Steel Tubes, Aluminum Legs (type 3 hard black anodized), Military Black Chrome; and a Machined, Welded Junior Receiver. It is ideal for low angle shooting with heavy lights and accessories, supports up to 80 lb. it is very strong but folds down to...
The Savage Drop Stand Light Stand (7 ft.) is hands-down the easiest and quickest light stand set-up on the market today! The stand's essential benefit is in its auto-extending and collapsing legs that allow for quick and easy repositioning of lighting when moving between groups and in tight spaces....
The Manfrotto 5001B Nano Light Stand (6.2 ft., Black)is perfect for supporting small light fixtures on location. The stand folds down to 19", making it easy to fit into a location case. Since it has five sections, support strength is maintained as the fixture is raised; most of the column remains...
This Matthews Century Plus kit consists of a C Plus Stand with 20 inch riser and removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.
The maximum height of this stand with the arm extended is 5.25' (1.6 m). The stand itself rises to...
This Avenger Baby Stand 17 with Leveling Leg (Chrome-plated, 5.75 ft.) features steel legs and aluminum risers and is available in silver only. The stand has 3 sections and 2 risers, can support a maximum payload of 4kg and can reach a maximum height of 1.75m. It has 1 leveling leg so you can...
In the few short years that the Magic Finger has been out in the market, it has become one of the most popular grip accessories of all time. The 5/8" pin attached to the ball joint pivots from -15deg. to +90deg. while the collar rotates 360 deg. All axis lock positively with the one locking handle....
The Zuma 8ft. Light Stand (Black) is steel made for durability that can handle 10 pounds of weight. The light stand features adjustable, secure locking system and ideal for portable. The light stand is great for light and medium weight strobes, flash units, LED lights, reflectors and softboxes....
The GTX Studio 13 ft. Heavy-Duty Light Stand (Black) is a black anodized aluminum support that rises to a height of 13' and folds down to 46.5" for storage and transport. The stand will handle up to 10 lb and is topped with a removable, reversible 5/8" spigot with 1/4"-20 and 3/8"-16 threads....
The Mathews Mini Matthellini Clamp 3/8 in. Threaded Pin provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center...
The Profoto Pro Plus Standard Stand Adapter Plus is a replacement part for the one that comes with all standard Pro and Acute heads. It allows the head to be mounted on a light stand with an industry-standard 5/8" stud.
The head on these arms now feature two holes 3/8? and 5/8? eliminating confusion. New castings offer positive lock in all directions. The strongest and most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip like other manufacturer?s products
The Matthews 2 in. Matthellini Center Jaw Clamp with HYPER-CHROME Coating absorbs light, adding more control over lighting design than ever. With a jaw redesign, the HYPER-CHROME Matthellini offers more than a new color: it secures tighter while enabling smoother hand unlocking; controls lighting...
The STUFFT Cinema Works 25 lb Sandbag (Black with Red Handle) is used for securing the bases of light stands and set walls. The sand bags are useful to balance the light stands. The sand bag has a hand strap for easy handling and hanging on hooks. It is made of high quality material for longer...
The Mini Matthellini Clamp is a whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. When used with Matthews' new ROADRAGS kit, the MINIGRIP system eliminates the need for extra stands. The Mini-Matthellini Clamps are half...