The Westcott Scrim Jim Cine Clamp with 5/8 in. Stud has a long 5/8" post that's designed to connect to a stand-mounted grip head to support the frame. For large frames and full tilting, it's recommended that a clamp and stand be used on /each side of the frame. The clamp can support up to 22 lb,...
The new Litepanel Frame Hardware Kit allows you to place a LitePanel wherever you wish with added security and functionality to the LitePanel. A unique modular design facilitates a variety of clamping options giving you unlimited freedom to reproduce your vision. Ideally suited to work with the...
Heavy duty 3mm square section tubes-slot and pin-lock together, rapidly providing a stable frame for lighting control textiles. By reducing or adding tubes you can create any frame size.
The Avenger H660 Deluxe Fast-Loc Frame kit is lightweight and quick to set up. The square section aluminum tubes slide and lock together to provide a strong frame which supports lighting control textiles of (4' x 4' and 6' x 6' in size).
The LA Rag House 48 x 48 in. Aluminum Flat Gel Frame has tig welded out of aluminum and 5/8" mounting pin is offset from center increasing the number of frames that can be stored in an area.
Litepanels are desinged with a shock-corded frame so they can be set up and torn down in minutes. The square tube frame prevents twisting while the rounded edges make ti easy to positin two panels together.
The flat edges of the Matthews 48x48 In. Diffusion Frame (Knife Blade) make it ideal for quick gel changes with 2 sided tapes. It does not require removing the frame for replacing the gel.
The Savage V-Hold for Light Modifiers is an articulated two-section arm that can unfold from a collapsed V-shaped 25.6" length to a fully-extended 94". The V-Hold has two 5/8" mounting options and can clamp onto round objects 1.6" in diameter.
Adjusts from 6 inches up to 68 inches, this reflector holder is very easy and convenient to use. The holder attaches to a standard light stand, and features a double ball joint controlled by a single handle. May be adjusted to any angle. The reflector arm adjust to fit the size of the reflector,...
The Phottix Reflector Holder K for Circular Reflectors is for circular reflectors, with ball head and light stand mount. The Reflector Holder K mounts onto the top of any light stand with a top section diameter of 1.25 to 1.9cm (0.5 to 0.75 inches), providing a secure yet adjustable support arm...
The Westcott Scrim Jim Cine 1/3-Stop Hard Diffusion Panel (2 x 2 ft.) is especially designed to add a frosted surface to your 2 x 2 ft. Flex LED Mat. The hard sheet softens and diffuses the light output resulting in a more flattering light to minimize the cross-shadowing effects. The panel has...
This heavy duty 3-section one piece crossbar features twist locks to allow continuous adjustment from 4 feet to 10 feet. Just turn the section counterclockwise to release, extend to the length desired and then turn clockwise to lock in place. Features locking screws for a secure fit to user's...
Matthews now offers the Snap-A-Part frames for easy handling and storage. Simply 'snap apart' the frames for breakdown and storage in your grip and lighting truck. Snap-A-Part frames come in both light and heavy duty 1" square tubing. The Matthews Butterfly Overhead Snap-A-Part Light Duty Frame...
The Matthews 12x12 ft. Butterfly Overhead Hollywood Frame is made of 1 inch thick, hollow square tubing. This strong square tubing insures steady support for the choice of light-shaping materials. Matthews offers a wide variety of frames to hold your overheads and butterflies.
Heavy duty 3mm square section tubes-slot and pin-lock together, rapidly providing a stable frame for lighting control textiles. By reducing or adding tubes you can create any frame size.
The Matthews Butterfly Overhead Snap-A-Part Frame (8x8 ft.) is for easy handling and storage. It features the Quick Reverse Ear which will enable the removal and reversal for quick 180 degrees frame repositioning. Simply 'snap apart' the frames for breakdown and storage in your grip and lighting...
The Matthews 6 x 6 ft. Butterfly Overhead Hollywood Frame is made of 1 inch thick, hollow square tubing. This strong square tubing insures steady support for the choice of light-shaping materials. Matthews offers a wide variety of frames to hold your overheads and butterflies. Hollywood Frames...
The Avenger H2008 8 x 8 ft. Modular Fold Away Frame is a unique overhead frame that allows setup and breakdown in seconds. Precisely engineered, the hinged connection points easily fold to transport the frame from set to set or through doorways without having to remove the fabric.
The Westcott Scrim Jim Cine Frame Set (8 x 8 ft.) is a complete modular framework designed for filmmakers and photographers. The Scrim Jim Cine is the ultimate light control system, giving users the ability to build and create whatever tool they need for whatever lighting they encounter. This...
These honeycomb Reflectors are 75% lighter in weight than the Standard Reflectors, measuring 40"x40" and costing considerably less. Three different Reflectors are available. The Standard Matthboard features a "hard" side and a "soft" side. In addition, the Silver Fill Matthboard offers a "super...
The Westcott Scrim Jim Cine Frame Set (4 x 6 ft.) is a complete modular framework designed for filmmakers and photographers. The Scrim Jim Cine is the ultimate light control system, giving users the ability to build and create whatever tool they need for whatever lighting they encounter. This...
The Westcott Scrim Jim Cine Frame Set (4 x 4 ft.) is a complete modular framework designed for filmmakers and photographers. The Scrim Jim Cine is the ultimate light control system, giving users the ability to build and create whatever tool they need for whatever lighting they encounter. This...
The Matthews Frame Part Quick Reverse Ear for 1 In. Square Tube is the strongest, most versatile way of suspending an overhead frame. The ears are guaranteed to provide a fast and efficient way to flip the frame allowing two rags to be tied off to the frame, one on either side. Flip from bounce...
This Westcott Scrim Jim Cine Swing Hinge Corner Frame Connector can be used to connect any four Scrim Jim Cine Frame Tubes, for building adjustable book lights and v-flats. Featuring a durable construction, this connector includes a built-in positive-locking button to ensure that Scrim Jim Cine...
The Westcott Scrim Jim Cine Frame Tube (46 In.) is a complete modular system designed to bounce, block, diffuse, subtract, and shape light. This system's durable, lightweight frames are designed to configure in sizes from 1'x 1' up to 8' x 8'. Frame pieces vary in size from 10" tubes and upward,...
A wide variety of Corners, Connectors, Ears and Pins to use as replacement parts for Butterfly/Overhead frames or use them to make your own custom size frame.
The Photoflex Crossbar for Litepanel Frame (77 In.) add additional control and convenience to the Photoflex LitePanel. It prevents the frame from bowing when used above the subject, or tilted at an angle.
Features:
Add additional control and convenience to the Photoflex LitePanel
The Westcott Scrim Jim Cine Frame Tube (22 In.) is a complete modular system designed to bounce, block, diffuse, subtract, and shape light. This 22" Scrim Jim Cine Tube can be used in combination with other tubes and various Scrim Jim Cine connectors and fabrics to create flat frames, diffusion...
This Westcott Scrim Jim Cine 2D Corner Frame Connector can be used to connect any two Scrim Jim Cine Frame Tubes. Featuring a durable construction, this connector includes a built-in positive-locking button to ensure that Scrim Jim Cine Frames will stay connected throughout long shoots. The Scrim...
This Westcott Scrim Jim Cine 2 In. Straight Frame Connector can be used to connect any two Scrim Jim Cine Frame Tubes. Featuring a durable construction, this connector includes a built-in positive-locking button to ensure that Scrim Jim Cine Frames will stay connected throughout long shoots. The...